Kyocera KM-4230

Setting Up the Printer Driver
5
5-15
5.8 Stapling Documents
✎
Note
The staple function is available only if the optional single staple finisher
or folding finisher is installed on this machine.
Setting procedure
1 Click the “Setup” tab.
2 Click the [Detail of Output Setting] button to display the detailed
settings dialog box.
3 From the Staple drop-down list, select one of the following settings.
❍ If the single staple finisher is installed on this machine:
“OFF” or “Corner”
❍ If the folding finisher is installed on this machine:
“OFF”, “Corner”, “Top Side 2 Points”, “Left Side 2 Points”, or “Auto
2 Points”
✎
Memo
If the single staple finisher is installed on this machine, up to 30 pages
can be stapled at a time.
If the folding finisher is installed on this machine, up to 50 pages of A4/
Letter or smaller paper, or 25 pages of B4/Legal or larger paper can
be stapled at a time.