9
Scanning Images Using TWAIN (PC Scanning Function)
9-6
9.4.2 Searching the Scanner
Click the [Setting] button in the dialog box used to select the retrieval
destination of the scanned data to open a dialog box used to search the
scanners.
You can specify the following search conditions.
Broadcast
Searches using the broadcast protocol.
Multicasting
Searches using the multicasting protocol.
IP Port Base Specify the port number to be searched.
Broadcast Execute the search.
Max Hop for Search The number of hops to be searched is fixed at 0. You cannot
change this value.
IP Port Base Specify the port number to be searched.
Multicasting Execute the search.
To Next Page
Loading...
