Kyocera KM-4230

Scanning Images Using TWAIN (PC Scanning Function)
9
9-1
9 Scanning Images Using TWAIN (PC
Scanning Function)
TWAIN is an interface used to import images scanned on a certain device
onto different computer platforms. Here, TWAIN refers to controlling this
machine’s scanner and importing the scanned data into the application.
To use TWAIN, a TWAIN driver must be installed on the computer and
TWAIN configuration is required in this machine. This function is available
only when it is used over a network.
9.1 Operating Environment
The TWAIN driver operates in the following environments.
9.2 Installing the TWAIN Driver
Installation
1 On the supplied CD-ROM, open the folder (\Driver\English\TWAIN)
containing the TWAIN driver.
2 Double-click the “Setup.exe” file to run the installation program.
3 Carry out the installation by following the instructions on the screen.
Computer IBM PC or compatible
Operating System Windows 98/98SE, Windows Me, Windows 2000, Windows XP,
or Windows NT 4.0 (SP 6a or later)