8
Using the Scan Functions
8-44
8.7.3 Setting the E-mail Subject and Text
Using Printer Management Utility, set the subject and the text message of
the e-mail to be transmitted.
Setup procedure
1 Start up Printer Management Utility.
2 Enter the administrator access code, and log in to Administrator mode.
3 On the “Network” tab, click E-mail / Internet FAX, and then click E-
mail in the sub-menu that appeared.
4 Specify settings for the following.
Subject Enter the subject of the e-mail (up to 64 characters).
Description Enter the text of the e-mail (up to 256 characters).
To Next Page
Loading...
