Job Management
11
11-5
11.1.5 Proof and Print
If “Proof and Print” is selected when printing is set, a single copy is printed
and the remaining copies of the job are stored in the memory. The
remaining copies are not printed until job storage is cancelled from this
machine’s control panel.
Setting the printer driver
1 In the printer driver setup dialog box, click the “Job Management” tab.
2 Select “Proof and Print” from the Store Job drop-down list.
Operations on this machine
1 Touch [Job Control], then [Hold Job] on this machine’s control panel to
display the list of stored jobs.
2 Check the printing of the proof copy.
If you wish to print the remaining copies, select the job set to “Proof
and Print” from the stored job list that appeared, and then touch [OK].
If you wish to cancel the remaining copies, touch [Delete].
To Next Page
Loading...
