Kyocera KM-4230

Using Printer Management Utility
12
12-5
12.4.1 Cache Function of Web Browsers
Disabling the cache function of the Web browser
The newest information may not appear on the Printer Management Utility
screen due to the cache function of the Web browser. In addition,
problems indicated in the next section can occur when the cache function
is used.
To prevent these problems from occurring, disable the cache function of
the Web browser by carrying out the procedure below.
✎
Note
The menus and commands may vary depending on the Web browser
version, in which case refer to the help for the Web browser.
On Internet Explorer
1 From the “Tools” menu, choose “Internet Options”.
2 In the “General” tab, click [Settings] under “Temporary Internet files”.
3 Select “Every visit to the page” and click [OK].
On Netscape
1 From the “Edit” menu, choose “Preferences”.
2 In the “Category” box, choose “Advanced” and then “Cache”.
3 Under “Compare the page in the cache to the page on the network”,
select “Every time I view the page”.
Problems that occur when using the cache function
If the cache function of the Web browser is used, problems may occur
under the following conditions.
1 After logging into Administrator mode of Printer Management Utility,
timeout time is not configured.
2 Then, try to access any menu.
The timeout message screen appears.
3 Click [OK].
The User mode page appears.