3
Connecting to a Computer
3-4
3.2.1 Specifying the Interface Settings
If necessary, specify the parallel interface settings from this machine’s
control panel.
Parallel interface setting
1 Press the [Utility] key on this machine’s control panel, touch [Admin.
Mode], and then enter the administrator access code.
2 Touch [Printer Setting], then [Common Setting].
3 Specify settings for the following.
❍ I/O Timeout: Set the communication timeout. (10 to 300
seconds)
❍ Parallel Interface: Set the mode to be used with the parallel
interface. (“Compatible”, “Nibble”, or “ECP”)
To Next Page
Loading...
