Kyocera KM-4230

Using the Box Functions
10
10-9
10.6 Checking the Transmission Settings
You can check the transmission settings by pressing the [Mode Check]
key on this machine’s control panel.
When using Forward to E-mail, three tabs are displayed.
G On the Send screen, you can check the box name, file name, and
forward destination. Touch [Detail] to check the e-mail address of the
destination.
G On the Subject/From screen, you can check the subject of the e-mail
and the sender’s address (From address).
Touch [Change] beside “Subject” to change the subject of the e-mail.
Enter the subject (up to 64 characters) and then touch [Enter].
G On the Message screen, you can check the contents of the e-mail.