6
Network Printing in a Windows Environment
6-12
6.7 Setting Up a Print Service in NetWare
The printer controller supports the following environments.
Network Printing in a NetWare Environment
6.7.1 For Remote Printer Mode With NetWare 4.x Bindery
Emulation
✎
Note
Before using bindery emulation, check that bindery emulation is
compatible with the NetWare Server.
Setting procedure
1 From a client computer, log on with Supervisor permissions to access
the NetWare server where the PServer is registered.
2 Start up Pconsole.
3 From the Available Options list, select “Quick Setup”, and then click
the [Enter] button.
4 Enter the appropriate names in the Print server, New printer, New
print queue and Print queue volume fields, select Other/Unknown
from the Printer type field, and then save the specified settings.
5 Click the [Esc] button to quit Pconsole.
6 Use the NetWare Server console to load PSERVER.NLM.
✎
Note
For the queue user privileges, printer notification option,
assignment of multiple queues, and passwords, refer to the
NetWare documentation, and specify settings as necessary.
NetWare Version Protocol Used Emulation Service Mode
NetWare 4.x IPX NDS/Bindery PServer/NPrinter
NetWare 5.x/6 IPX NDS PServer
TCP/IP NDPS(lpr)
To Next Page
Loading...
