Kyocera KM-4230

Setting Up the Printer Driver
5
5-5
5.3 Settings
5.3.1 Setup Tab
5.3.2 Paper Tab
5.3.3 Quality Tab
Item Description
N-up Prints multiple pages on one page.
Refer to “Printing Multiple Pages on One Page” on page 5-8.
Watermark Prints a watermark on the pages. The watermark text can be
changed or edited.
Refer to “Printing Pages With Watermarks” on page 5-9.
Duplex/Booklet Selects the duplex or booklet printing setting.
Refer to “Specifying Duplex/Booklet Printing” on page 5-13.
Paper Source Specifies the paper source and the type of paper.
The paper source for the front cover, the back cover or for OHP
interleaving can also be specified.
Select a paper type specified with this machine.
Refer to “Adding a Cover and/or Interleaf When Printing” on
page 5-18.
Output Setting Specifies an output setting such as stapling, hole punching, or
folding.
Refer to “Stapling Documents” on page 5-15, “Hole Punching
Documents” on page 5-16, and “Folding Documents” on page 5-17.
Item Description
Original Document
Size
Specifies the size of the original document. Custom paper sizes can
also be specified.
Output Paper Size Specifies the output paper size.
An enlargement or reduction ratio can also be specified.
Refer to “Printing to Suit the Paper Size” on page 5-19.
Copies Specifies the number of copies to be made.
Collate Specifies that the pages be output in sets.
Orientation Specifies the printing orientation.
Item Description
Select Color or
Grayscale
Selects the color mode. If “Color (Manual)” is selected, clicking the
[Detail of Color Settings] button displays the Detail of Color Settings
dialog box, where detailed color settings can be specified.
Exposure Modes Selects the color matching mode.
Text: Text mode, Photo: Photo mode
Use Printer Font Sets whether to use the printer font.
Resolution Specifies the print resolution (600
× 600 dpi fixed).
Download as
Bitmap
Selects whether the font is downloaded as a bitmap or program
(vector font).
Glossy Mode Sets the glossy mode.