Kyocera KM-4230

Using the Scan Functions
8
8-29
8.6.2 Temporary Registration
Temporary registration differs from one-touch registration since the
temporary registration information is automatically cleared when this
machine is turned off. If you wish to recall the information numerous times
even after this machine is turned off, perform a one-touch registration.
When making a temporary registration, you can specify the scan mode
settings.
Here, the setup procedure using Printer Management Utility is explained.
You can also use the LDAP search function from this machine’s control
panel to enter the temporary registration. For details, refer to “Registering
Recipient E-Mail Addresses Using LDAP Search” on page 8-33.
Registration procedure
1 Start up Printer Management Utility.
2 On the “Scan” tab in User mode, click One Time Registration in the
menu.
A temporary registration list is displayed.
❍ One Time Registration area:
Displays “One Time Registration-1” to “One
Time Registration-8”.
❍ Destination: Displays an icon indicating the transmission
method of the temporary registration.
: Scan to E-mail icon
: Scan to FTP Server/Scan to PC icon
: Scan to HDD icon
: Scan to Internet FAX icon
---: Not registered
❍ [Delete] button: Deletes the selected temporary registration
key.