Kyocera KM-4230

Using the Scan Functions
8
8-19
Changing a one-touch name
You can change the name of the registered one-touch keys.
1 Touch [Change One-Touch name] on the MISC. screen in Scan mode.
An index list is displayed.
2 Select the index containing the one-touch key that you wish to rename,
and then touch [Enter].
3 Select the one-touch key that you wish to rename.
4 Change the one-touch key name (up to 12 characters), and then touch
[Enter].
The name of the one-touch key is changed.
Changing an index name
You can change the name of an index.
1 Touch [Change Index Name] on the MISC. screen in Scan mode.
An index list is displayed.
2 Select the index containing the name that you wish to change, and
then touch [Enter].
3 Change the index name (up to 10 characters), and then touch [Enter].
The name of the index is changed.
Changing the name of the transmission file
You can change the name of the file to be transmitted.
1 Touch [Change send file name] on the MISC. screen in Scan Mode.
2 Enter the file name (up to 21 characters) and then touch [Enter].
The name of the file to be transmitted is changed.