Using the Scan Functions
8
8-39
5 Touch the “Key Word” item to display the character input screen. Enter
the characters to be searched, and then touch [Enter].
6 Specify the search conditions.
❍ Includes: Searches for destinations that include the
specified character string.
❍ Identical: Searches for destinations that match the
specified character string.
❍ Begins: Searches for destinations that start with the
specified character string.
❍ Ends: Searches for destinations that end with the
specified character string.
❍ Don’t use: Searches for destinations that do not include
the specified character string.
7 As necessary, specify information for the “Full Name”, “E-mail”, “Last
Name”, and “First Name” fields.
8 Touch [Start Search].
The search result is displayed.
9 The rest of the procedure is the same as the procedure starting with
step 6 in “Performing a standard search” on page 8-36.
Displaying the previous search results
If you have performed an LDAP search before, you can display the
previous search results.
1 Touch [LDAP Search] on the Address screen in Scan mode.
The LDAP search screen appears.
2 Touch [Previous Result].
To Next Page
Loading...
