Kyocera KM-4230

9
Scanning Images Using TWAIN (PC Scanning Function)
9-4
❍ Paper Size: Set the paper size to be scanned.
❍ Resolution: Set the resolution.
Settings: 600 dpi, 400 dpi, 300 dpi, or 200 dpi
❍ Pixel Type: Specify the type of data to be scanned.
Settings: “Full Color”, “Gray Scale”, or “Black &
White”
❍ Place: Sets the scan mode of the document.
If “Duplex” is set to “On”, “Place” is set to
“ADF”.
Settings: “Glass” or “ADF”
❍ Duplex: Set whether the scanned document is a duplex
document.
Settings: “On” or “Off”
❍ Separate Scan: Specify the processing of multiple documents.
❍ Low Density Adjustment:
Specify whether to remove the background.
❍ [Prescan] button: Perform a test scan.
❍ [Scan] button: Scan the data and import the data into the
application.
❍ [Option] button: Open the Option dialog box.
Refer to “Setting the Option Dialog Box” on
page 9-5.
6 Click the [Scan] button.
The document is scanned, and the scanned data is imported into the
application.