Kyocera KM-4230

Using the Box Functions
10
10-11
The URL notification mail destination is an e-mail address registered to a
one-touch key or temporary registration key. It is specified using the
paramters below during one-touch key registration or temporary
registration. For the setup procedure, refer to “Registering Destinations in
Advance” on page 8-25.
G Forward to E-mail: Address (To:)
G Forward to FTP Server: URL Notification E-mail Address
Setting the mail destination from this machine’s control panel
When using Forward to FTP Server, the URL information is sent to the
address registered for “URL Notification E-mail Address” in the specified
one-touch key or temporary registration key. However, you can specify
mail destinations separately from this machine’s control panel.
Setup procedure
1 On this machine’s control panel, press the [Box] key.
2 Select the file to be forwarded.
3 On the Select destination screen select the destination for which the
transmission method is set to Scan to FTP Server.
4 Touch [E-mail Notification] on the MISC. screen.
5 Select the desired index (index number or [Temp. Registration]), and
then touch the key for the desired notification address.
✎
Note
The URL notification destination must be registered to the one-
touch key.
Only one-touch keys that have e-mail addresses registered can be
used to specify the destination.