Kyocera KM-4230

Using the Box Functions
10
10-15
7 Using an FTP client application, retrieve the image data from the FTP
server.
❍ If URL notification was not specified
Use your FTP client application to directly access the FTP server
and download the data from the folder containing the image data.
You may need to enter a user name and a password to access the
FTP server.
❍ If URL notification was specified
Refer to the information written in the e-mail message and access
the storage location of the image data. You may need to enter a
user name and a password to access the FTP server.
✎
Memo
Even if the URL notification destination was not specified when one-
touch keys or temporary registration keys were registered using
Printer Management Utility, you can specify the URL notification
destination from this machine’s control panel. (Refer to “URL
Notification Using E-mail” on page 10-10.)
If the FTP server registration, proxy server configuration, and the
registration of the destination are already done, perform steps 4
through 7.