Using Printer Management Utility
12
12-9
Detail – Output Tray
You can check the status the output trays of this machine.
✎
Note
This page can be displayed only if an optional output tray is installed
on this machine.
Procedure
➜ Click the “System” tab, click Detail, and then click Output Tray in the
sub-menu that appeared.
Output Tray Displays the trays for the option that is installed.
If single staple finisher is installed: “Top Tray”, “Elevator Tray”, or
“Third Tray”
If folding finisher is installed: “Saddle Stack Tray” or “Elevator
Tray”
Capacity Displays the capacity in terms of the number of pages of plain
paper of the A4/Letter size.
Paper Displays the status of each tray as either “Ready” or “Full”.
To Next Page
Loading...
