Using Printer Management Utility
12
12-11
Detail – Interface Info
You can check the interface information for this machine.
Procedure
➜ Click the “System” tab, click Detail, and then click Interface Info in the
sub-menu that appeared.
Interface Info
Type Displays the network type that can be used.
“Ethernet 10Base-T/100Base-TX”
IP Address Displays the assigned IP address.
MAC Address Displays the MAC address of this machine.
Local I/F
(This item appears only if the optional local interface kit is installed in this machine.)
Type Displays the local interface (IEEE1284) that can be used on
this machine.
To Next Page
Loading...
