12
Using Printer Management Utility
12-70
Enabling/Disabling SSL/TLS and Setting Encryption Strength
Procedure
➜ To change the settings, specify the desired settings, and then click the
[Apply] button.
If enable/disable condition of SSL/TLS was changed, click the [OK] button
and log out once from Administrator mode.
If the enable/disable condition of SSL/TLS was not changed, the specified
SSL/TLS information is displayed.
SSL/TLS Select whether to enable or disable the SSL/TLS function.
Settings: “Enable” or “Disable”
Encryption Strength Select the encryption strength.
To Next Page
Loading...
