Kyocera KM-4230

8
Using the Scan Functions
8-12
Using this machine’s control panel
Settings for the “Device Name”, “Color/Grayscale Compression Level”,
and “Pri. Comp. Method for Monochrome” parameters can also be set
from this machine’s control panel.
1 On this machine’s control panel, press the [Utility] key, touch [Admin.
Mode], and then enter the administrator access code.
2 Touch [Scan Setting].
3 Specify settings for the “Device Name”, “Color/Grayscale
Compression Level”, and “Pri. Comp. Method for Monochrome”
parameters.
Color/Grayscale
Compression Level
Set the image compression mode to high resolution,
standard, or low resolution.
Priority Compression Method
for Monochrome (PDF)
Set the priority compression method of PDF files to MH or
MMR.
Priority Compression Method
for Monochrome (TIFF)
Set the priority compression method of TIFF files to MH or
MMR.
Send
Scanned File Separation Set the division method (in units of pages) when the
maximum size is exceeded for Scan to E-mail and Scan to
Internet FAX operations.
For e-mail transmission, refer to “Binary Division and
Scanned File Separation” on page 8-43.
For Scan to Internet FAX, refer to “Binary Division and
Scanned File Separation” on page 8-68.
E-mail Address (From:) Specify the sender’s e-mail address (From address) that is
used for e-mail messages sent from this machine. This is
the sender’s e-mail address that appears for Scan to E-mail
and Scan to Internet FAX operations, and for URL
notification by e-mail.
For e-mail transmission, refer to “Error Notification” on
page 8-45.
For Scan to Internet FAX, refer to “Error Notification” on
page 8-71.
For URL notification by e-mail, refer to “URL Notification
Using E-mail” on page 8-23.