Printing Functions
5-22 OPERATION GUIDE
Courier/Letter Gothic Font Setting
You can select the thickness of the Courier or Letter Gothic font from two types. An example of changing the
Courier font thickness is described below.
1 Display the Font screen. (See How to Display the
Font Screen on page 5-19.)
2 Press U or V to select Select Font, and then
press the Enter key.
NOTE: If optional fonts as well as internal fonts are
stored in this machine, a screen for selecting
Internal font or Option font is displayed. Press
U or V to select Internal font.
3 Press U or V to select Courier, and then press
the Enter key.
4 Press U or V to select Regular or Dark, and then
press the Enter key.
5 Press the Reset key.
The message display returns to the printer basic
screen.
Code Set Selection
With the PCL6 emulation, you can select a code set.
1 Display the Font screen. (See How to Display the
Font Screen on page 5-19.)
2 Press U or V to select Code Set, and then press
the Enter key.
3 Press U or V to select the desired code set, and
then press the Enter key.
To Next Page
Loading...
