Kyocera TASKalfa 181 - Printing Code Job List; E-Mps Detail Settings

Printing Functions
5-8 OPERATION GUIDE
3 Press U or V to select Print, and then press the
Enter key.
The virtual mailbox list is printed.
Printing Code Job List
Permanent code jobs in the hard disk can be printed.
1 Display the e-MPS screen. (See How to Display the
e-MPS Screen on page 5-4.)
2 Press U or V to select List of code Job, and
then press the Enter key.
3 Press U or V to select Print, and then press the
Enter key.
The code job list is printed.
e-MPS Detail Settings
The e-MPS settings such as the maximum number of documents that can be stored in the hard disk and the
capacity assigned to each function can be changed.
Maximum Number of Quick Copy Jobs That Can Be Registered
1 Display the e-MPS screen. (See How to Display the
e-MPS Screen on page 5-4.)
2 Press U or V to select e-MPS Configuration,
and then press the Enter key.
3 Press U or V to select Quick Copy, and then
press the Enter key.
4 Press Y or Z to enter the maximum number of jobs
that can be stored.
You can set the number to 0 to 50.
5 Press the Enter key.
No
Print
List of VMB
Print VMB Data
List of VMB
e-MPS
List of Code JOB
No
Print
List of Code JOB
List of VMB
List of Code JOB
e-MPS
e-MPS Configuration
Back
Quick Copy
e-MPS Configuration
Temp Code Job Size
(0
Quick Copy
32 50)