Kyocera TASKalfa 181 - Duplex Printing Error Detection

Printing Functions
OPERATION GUIDE 5-49
5
6 Press the Reset key.
The message display returns to the printer basic
screen.
Duplex Printing Error Detection
This setting is available if the optional duplex unit is installed. You can select whether or not to display Duplex
disabled Press GO when you select duplex printing and specify a paper type that cannot be used for duplex
printing such as label.
1 Display the Others screen. (See How to Display the
Others Screen on page 5-45.)
2 Press U or V to select Finishing Error, and
then press the Enter key.
3 Press U or V to select Proces. Duplex print,
and then press the Enter key.
4 Press U or V to select On or Off, and then press
the Enter key.
5 Press the Reset key.
The message display returns to the printer basic
screen.
Setting Processing
On • If you select GO, one-sided printing is performed.
• If you select CANCEL, printing is cancelled.
Off One-sided printing is performed.
Finishing Error
Auto Continue
Resource Prot .
Others
Finishing Error
Back
Proces. Duplex print
Staple Setting
Back
On
Duplex Print Process
Off