Kyocera TASKalfa 181 - Job Separator

System Menu
OPERATION GUIDE 6-21
6
2 Press U or V to select Copy Otput Destn, and
then press the Enter key.
3 Press U or V to select the desired output
destination, and then press the Enter key.
4 Press the Reset key.
The message display returns to the copier basic
screen.
Fax Output Destination
Set the paper output destination with priority for received fax data and various reports.
NOTE: This item is displayed only if the optional fax kit and finisher or job separator are installed.
1 Display the Machine Default screen. (See How to
Display the Machine Default Screen on page 6-13.)
2 Press U or V to select Fax Otput Destn, and
then press the Enter key.
3 Press U or V to select the desired output
destination, and then press the Enter key.
4 Press the Reset key.
The message display returns to the copier basic
screen.
Machine Default :
Copy Otput Destn Top Tray:
:
Low Power Time :
Sleep Mode Time 1 Min.
1Min.
Copy Output Destination :
Top Tray
Finisher
*
Setting Output destination
Top tray Output tray of main body
Finisher Optional finisher
Job separator Optional job separator
Machine Default :
Fax Output Destn Top Tray:
Copy Otput Destn Top Tray:
Low Power Time : 1 Min.
Fax Output Destination :
Top Tray
Finisher
*