Kyocera TASKalfa 181 - Page 174

System Menu
6-22 OPERATION GUIDE
Default Operation Mode
Select the default screen to be displayed when the power is turned on from the copy screen or the fax screen.
NOTE: This item is displayed only if the optional fax kit is installed.
1 Display the Machine Default screen. (See How to
Display the Machine Default Screen on page 6-13.)
2 Press U or V to select Main mode, and then press
the Enter key.
3 Press U or V to select Copy mode or Fax mode,
and then press the Enter key.
4 Press the Reset key.
The message display returns to the copier basic
screen.
Key Sound
Select whether or not to enable the beep sound that will be emitted each time a key on the operation panel is
pressed.
1 Display the Machine Default screen. (See How to
Display the Machine Default Screen on page 6-13.)
2 Press U or V to select Key sound On/Off, and
then press the Enter key.
3 Press U or V to select Off or On, and then press
the Enter key.
4 Press the Reset key.
The message display returns to the copier basic
screen.
Main Mode Copy:
Machine Default :
Fax Output Destn Top Tray:
Copy Otput Destn Top Tray:
Select the Main Mode :
Copy Mode
Fax Mode
*
Key Sound On /Off On:
Machine Default :
:
Low Power Time :
Sleep Mode Time 1 Min.
1Min.
Key Sound On /Off
Off
On
*