Printing Functions
5-26 OPERATION GUIDE
3 Press U or V to select Portrait or Landscape,
and then press the Enter key.
4 Press the Reset key.
The message display returns to the printer basic
screen.
Page Protect Mode
To maintain the printer memory efficiently, the default setting of this mode is Auto. Normally, this menu is not
displayed. If a print overrun error occurs due to insufficient printer memory, Page Protect is forcibly set to On.
After the print overrun error occurs, be sure to reset this setting to Auto.
1 Display the Page Set screen. (See How to Display
the Page Set Screen on page 5-24.)
2 Press U or V to select Page Protect, and then
press the Enter key.
3 Press U or V to select Auto, and then press the
Enter key.
4 Press the Reset key.
The message display returns to the printer basic
screen.
Line Feed (LF) Action
Set the action of the machine to be executed when it receives a line feed code (0AH).
1 Display the Page Set screen. (See How to Display
the Page Set Screen on page 5-24.)
2 Press U or V to select LF Action, and then press
the Enter key.
3 Press U or V to select the desired action from the
followings, and then press the Enter key.
LF only: Performs a line feed.
CR and LF: Performs a line feed and carriage
To Next Page
Loading...
