Printing Functions
5-4 OPERATION GUIDE
e-MPS Function
The following items can be set in e-MPS function setting.
• Printing Quick Copy/Proof-and-Hold
• Deleting Quick Copy/Proof-and-Hold
• Printing Private Print/Stored Job
• Deleting Private Print/Stored Job
• Printing Virtual Mailbox Accumulated Data
• Printing Virtual Mailbox List
• Printing Code Job List
• e-MPS Detail Settings
NOTE: To use the e-MPS functions, the optional hard disk must be installed. For details on e-MPS, refer to the
KX Printer Driver Operation Guide.
Even if the RAM Disk Operation (see page 2-44) is turned On, the e-MPS function can be used. In this case,
only proof-and-hold and printing private print can be used.
How to Display the e-MPS Screen
1 Press the Print key.
2
Press U or V to select MENU, and then press the
Enter key.
3
Press U or V to select e-MPS, and then press the
Enter key.
The e-MPS screen is displayed. Next, perform the
setting referring to the following description of each
setting item.
To Next Page
Loading...
