Kyocera TASKalfa 181 - MP Tray Settings

System Menu
6-28 OPERATION GUIDE
MP Tray Settings
Set the following items for feeding paper from the MP tray.
Paper Size
Set the size of paper to be used from the MP tray. You can use irregular size paper by entering the size.
NOTE: If the paper size is unknown or no particular paper size setting is required, select Universal Size.
Selecting a Size from Regular Sizes
Sizes that can be set:
Inch Specification - 11
× 17" (Ledger), 8 1/2 × 14" (Legal), 8 1/2 × 13" (Oficio II), 8 1/2 × 11" (Letter), 11 × 8 1/2", 5
1/2 × 8 1/2" (Statement), A4R, A4
Metric Specification - A3, B4, A4R, A4, B5R, B5, A5R, B6R, A6R, 8
1/2 × 11" (Letter), 11 × 8 1/2", Folio
1 Press the System Menu/Counter key.
2 Press U or V to select MP Tray Setting, and
then press the Enter key.
3 Press U or V to select the paper size, and then
press the Enter key.
The MP Tray Paper type screen is displayed.
Proceed to Paper Type described below.
Selecting a Size from Other Regular Sizes
Sizes that can be set:
Inch Specification - A3, B4, B5R, B5, A5R, B6R, A6R, HAGAKI, Folio, Executive, ISO B5, Envelope DL,
Envelope C5, Envelope C4, Comm. #10, Comm. #9, Comm. #6-3/4, Monarch, OufukuHagaki, YOUKEI 2,
YOUKEI 4, 8K, 16KR, 16K
Metric Specification - 11
× 17" (Ledger), 8 1/2 × 14" (Legal), 8 1/2 × 13" (Oficio II), 5 1/2 × 8 1/2" (Statement),
HAGAKI, Executive, ISO B5, Envelope DL, Envelope C5, Envelope C4, Comm. #10, Comm. #9, Comm. #6-3/
4, Monarch, OufukuHagaki, YOUKEI 2, YOUKEI 4, 8K, 16KR, 16K
1 Press the System Menu/Counter key.
2 Press U or V to select MP Tray Setting, and
then press the Enter key.
End
System Menu / Counter:
Language
MP Tray Setting
MP Tray Paper Size :
Input Size
End
System Menu / Counter:
Language
MP Tray Setting