Kyocera TASKalfa 181 - Border Erase

Copying Functions
OPERATION GUIDE 4-23
4
Border Erase
Use Border Erase to remove black shadows that appear around the outside of the original when making copies.
The following options can be selected.
Sheet Erase
Erases black borders around the single sheet original.
Book Erase
Erases black borders around the edges and in the
middle of the original such as a thick book.
In each option, the available ranges are as below.
NOTE: To specify the default width value of Border Erase, refer to Border Erase Width Default Value on page
6-11 for details.
Use the procedure below to erase borders when copying.
1 Press the Copy key.
2 Place the originals on the platen.
3 Press the Border Erase key.
4 Press U or V to select Sheet Erase to erase
borders for an individual sheet or Book Erase to
erase borders for a book, and then press the Enter
key.
Original Copy
Original Copy
Input units Border Erase Range
Inch Models 1/8 to 3/4"(in 1/8" increments)
Metric Models 1 mm to 18 mm (in 1 mm increments)
Border Erase:
Sheet Erase
Book Erase