Kyocera TASKalfa 181 - Ecoprint

Copying Functions
4-18 OPERATION GUIDE
EcoPrint
Use EcoPrint to save toner when printing. Use this function for test copies or any other occasion where high
quality print is unnecessary.
NOTE: The copy exposure will be a little lighter.
You can select whether or not to turn on the ecoprint mode at a default setting. Refer to EcoPrint Mode on page
6-4.
The procedure for making copies using EcoPrint is explained below.
1 Press the Copy key.
2 Place the originals on the platen.
3 Press the Function key.
4 Press U or V to select EcoPrint, and then press
the Enter key.
5 Press U or V to select On or Off, and then press
the Enter key.
6 Press the Start key to start copying.
EcoPrint
Function :
Continuous Scan
Auto Rotation
:
Off
On
Off
:
:
EcoPrint :
Off
On
*