Kyocera TASKalfa 181

Printing Functions
OPERATION GUIDE 5-19
5
Font
You can select the default font for the current interface. The default font can be one of the internal fonts or a font
stored in the optional memory card.
You can set the following items for fonts.
• Font Selection
•Font Size
• Courier/Letter Gothic Font Character Pitch
• Courier/Letter Gothic Font Setting
• Code Set Selection
• Font List Printing
NOTE: You can set the font for each interface.
How to Display the Font Screen
1 Press the Print key.
2 Press U or V to select MENU, and then press the
Enter key.
3 Press U or V to select Font, and then press the
Enter key.
4 Press U or V to select the interface to set, and
then press the Enter key.
The Font screen is displayed. Next, perform the
setting referring to the following description of each
setting item.
Font Selection
1
Display the Font screen. (See How to Display the
Font Screen on page 5-19.)
2 Press U or V to select Select Font, and then
press the Enter key.
NOTE: If optional fonts as well as internal fonts are
stored in this machine, a screen for selecting Internal
font or Option font is displayed. Press U or V to select
the font to set.
GO
CANCEL
Ready
MENU
Menu
Interface
Emulation
Font
Back
USB
Interface
Network
Back
Select Font
Font
Code Set