Kyocera TASKalfa 181 - Page 118

Printing Functions
5-18 OPERATION GUIDE
2 Press U or V to select On or Off, and then press
the Enter key.
If you set On, the details of any error will be printed.
3 Press the Reset key.
The message display returns to the printer basic
screen.
KPDL (AUTO) Alternative Emulation Selection
If you set KPDL (AUTO), switching between KPDL and an alternative emulation mode will be automatically
performed according to print data. Continue the procedure from step 5 of emulation mode selection to set this
item as shown below.
Available emulation modes: PCL6, KC-GL, Line Printer, IBM Proprinter, DIABLO 630, EPSON LQ-850
1 Press U or V to select Alt. Emulation, and
then press the Enter key.
2 Press U or V to select the desired emulation, and
then press the Enter key.
3 Press the Reset key.
The message display returns to the printer basic
screen.
Back
On
Print KPDL Errs
Off
Back
Alt. Emulation
KPDL(AUTO)
Print KPDL Errs
Back
PCL 6
Alt. Emulation
KC-GL