Printing Functions
OPERATION GUIDE 5-17
5
KC-GL Pen Thickness
If you have selected the KC-GL emulation, you can set the thicknesses of the eight pens and the page size.
Continue the procedure from step 5 of Emulation Mode Selection to set these items as shown below.
1 Press U or V to select KC-GL Pen Adjust, and
then press the Enter key.
2 Press U or V to select the pen to set, and then
press the Enter key.
3 Press Y or Z to enter the thickness (number of
dots), and then press the Enter key.
4 Press U or V to select Back, and then press the
Enter key.
5 Press U or V to select KC-GL Page Set, and
then press the Enter key.
6 Press U or V to select the page size, and then
press the Enter key.
NOTE: SPSZ is the size specified with the
PRESCRIBE SPSZ command. For details of the
PRESCRIBE commands, refer to the PRESCRIBE
Command Reference Manual.
7 Press the Reset key.
The message display returns to the printer basic
screen.
KPDL Error Printing
The details of any error that occurs during printing in the KPDL emulation mode can be printed. Continue the
procedure from step 5 of Emulation Mode Selection to set this item as shown below.
1 Press U or V to select Print KPDL Errs, and
then press the Enter key.
To Next Page
Loading...
