Printing Functions
OPERATION GUIDE 5-39
5
RAM Disk Operation
RAM Disk Functions
This machine is equipped with RAM disk functions. The RAM disk is a virtual disk unit that uses a part of the
memory. If you assign a certain size of the memory to the RAM disk, you can use the RAM disk for electronic
sorting (for reduction of total print time) and storage and reading of data. Also you can use the e-MPS function
(see page 5-4).
IMPORTANT: Note that data written to the RAM disk is deleted when this machine is reset or the main power
switch is turned off.
The RAM disk area is assigned from the user available memory. Consequently, note that printing speed may be
lower or insufficient memory occurs depending on the RAM disk setting value.
The RAM disk functions are disabled at the default setting. To use the RAM disk functions, set as follows.
1 Press the Print key.
2
Press U or V to select MENU, and then press the
Enter key.
3
Press U or V to select RAM Disk Mode, and then
press the Enter key.
4
Press U or V to select On, and then press the
Enter key.
Change # is displayed.
5
Press the Reset key.
6
Press U or V to select Yes, and then press the
Enter key.
This machine restarts.
RAM Disk Operation
1 Press the Print key.
2
Press U or V to select MENU, and then press the
Enter key.
To Next Page
Loading...
