Troubleshooting
9-20 OPERATION GUIDE
Optional Document Processor
If Misfeed in DP. Remove original(s) appears and the jam location indicator shown in the illustration
blinks, a paper jam has occurred in the optional document processor. Perform the following procedure to remove
the jammed original(s).
1 Remove all of the originals remaining in the original
table.
2 Open the left cover.
3 Remove the jammed original without tearing it.
NOTE: If the original does happen to tear, remove any
loose scraps from inside the document processor.
Failure to do so may cause another paper jam later.
4 Raise the paper feed unit A.
To Next Page
Loading...
