Kyocera TASKalfa 181

Job Accounting
OPERATION GUIDE 7-15
7
4 Press U or V to select Off or On, and then press
the Enter key.
5 Press U or V to select End, and then press the
Enter key.
Fax Job Accounting
You can select whether or not to enable job accounting for the fax functions.
NOTE: This item is displayed if the optional fax kit is installed.
1 Display the Job Accounting screen. (See How to
Display the Job Accounting Screen on page 7-3.)
2 Press U or V to select Job Accounting Def.
Set, and then press the Enter key.
3 Press U or V to select Fax Job Account, and
then press the Enter key.
4 Press U or V to select Off or On, and then press
the Enter key.
5 Press U or V to select End, and then press the
Enter key.
Operation against Excess over Limit
You can select whether to stop output by prohibiting immediately use of the machine, to stop the operation from
the next job or to display a warning message only, when the limit of count that has been set with the function of
the limit of use is exceeded.
1 Display the Job Accounting screen. (See How to
Display the Job Accounting Screen on page 7-3.)
Scanner Job Accounting :
Off
On
*
Prnt Job Account .
Job Accounting Default Setting
End
Copy Job Account . : On
: On
Job Accountg Def . Set.
Job Accounting :
Each Job Accounting TL
Edit Job Accounting
[]On
Fax Job Accountng
Job Accounting Default Setting
Prnt Job Account .
Scanner Job Accnt
: On
: On
: On
Fax Job Accounting :
Off
On
*
Prnt Job Account .
Job Accounting Default Setting
End
Copy Job Account . : On
: On