Copying Functions
OPERATION GUIDE 4-5
4
Zoom Copying
Adjust the magnification to reduce or enlarge the original image. The following zoom options are available.
NOTE: When magnification ratio is larger than 201%, the images will be rotated 90° counter-clockwise prior to
copying.
Auto Zoom Magnification Selection Mode
Original images are reduced or enlarged according to the selected paper size.
NOTE: You can set a default setting so that the auto zoom magnification selection mode is selected when you
select a cassette. Refer to Default Magnification on page 6-6.
Automatically reduces or enlarges the original image
suitably to the selected paper size.
The procedure for auto zoom magnification selection mode is explained below.
1 Press the Copy key.
2 Place the originals on the platen.
3 Press the Auto%100% key.
AUTO % is displayed on the message display.
4 Press the Paper Selection key to select the copy
paper.
The magnification is displayed on the message
display.
5 Press the Start key to start copying.
Manual Zoom Mode
With this mode, the magnification can be set between 25 % and 400 % in 1 % increments.
To Next Page
Loading...
