Kyocera TASKalfa 181 - Paper Source; Duplex Print Mode

Printing Functions
5-42 OPERATION GUIDE
Paper Source
Set the paper source to be selected first.
1 Display the Paper Handling screen. (See How to
Display the Paper Handling Screen on page 5-41.)
2 Press U or V to select Feed Select, and then
press the Enter key.
3 Press U or V to select the desired paper source,
and then press the Enter key.
4 Press the Reset key.
The message display returns to the printer basic
screen.
Duplex Print Mode
Set the binding position on finished prints in duplex printing.
NOTE: This setting is displayed only if the optional duplex unit is installed.
Back
MP Tray Mode
Paper Handling
Feed Select
Back
MP Tray
Feed Select
Cassette 1
Setting Output destination
Short edge bind Binding at a short edge
Long edge bind Binding at a long edge