Kyocera TASKalfa 181 - Page 85

Copying Functions
OPERATION GUIDE 4-17
4
Use the procedure below to select the orientation when placing the originals on the platen.
1 Press the Copy key.
2 Place the originals on the platen.
3 Press the Function key.
4 Press U or V to select Orig. direction, and
then press the Enter key.
5 Press U or V to select Top Edge Top or Top
Edge Left, and then press the Enter key.
6 Press the Start key to start copying.
Continuous Scan
Function :
End
Orig. Orient . :
:
Top Edge
Off
Original Orientation :
Top Edge Top
Top Edge Left
*