Kyocera TASKalfa 181 - Page 181

System Menu
OPERATION GUIDE 6-29
6
3 Press U or V to select Other Regular Size,
and then press the Enter key.
4 Press U or V to select the paper size, and then
press the Enter key.
The MP Tray Paper type screen is displayed.
Proceed to MP Tray Paper Type described below.
Entering a Paper Size
1 Press the System Menu/Counter key.
2 Press U or V to select MP Tray Setting, and
then press the Enter key.
3 Press U or V to select Input Size, and then
press the Enter key.
4 Press Y or Z to set the vertical size and then press
V to select the horizontal size.
You can set the vertical size to 3 7/8" to 11 5/8" in
1/8" increments [98 to 297 mm in 1 mm
increments].
5 Press Y or Z to set the horizontal size.
You can set the horizontal size to 5 7/8" to 17" in 1/
8" increments [148 to 432 mm in 1 mm increments].
6 Press the Enter key.
The MP Tray Paper type screen is displayed.
Proceed to Paper Type described below.
MP Tray Paper Size :
Other Regular Size
Other Regular Size :
End
System Menu / Counter:
Language
MP Tray Setting
MP Tray Paper Size :
Universal Size
Input Size
*
Input Size :
5
7
8
"
3
7
8
"
Input Size :
3
7
8
"
" 5
7
8