Kyocera TASKalfa 181 - Page 167

System Menu
OPERATION GUIDE 6-15
6
NOTE: For the 18 ppm model, cassettes 2 to 4 are included in the optional paper feeder. For the 22 ppm
model, cassettes 3 and 4 are included in the optional paper feeder. This setting is displayed only if the optional
paper feeder is installed.
1 Display the Machine Default screen. (See How to
Display the Machine Default Screen on page 6-13.)
2 Press U or V to select the cassette for which you
set the paper size from Paper Size(1st) to
(4th), and then press the Enter key.
3 Press U or V to select Auto Detection
Metric, Auto Detection Inch or a paper size,
and then press the Enter key.
4 Press the Reset key.
The message display returns to the copier basic
screen.
Paper Type (cassettes 1 to 4)
Set the paper types of cassettes 1 to 4.
Paper types that can be set: Plain, Preprinted, Bond, Recycled, Rough, Letterhead, Color [Colour],
Prepunched, High quality, Custom 1(to 8)
NOTE: For the 18 ppm model, cassettes 2 to 4 are included in the optional paper feeder. For the 22 ppm
model, cassettes 3 and 4 are included in the optional paper feeder. This setting is displayed only if the optional
paper feeder is installed.
1 Display the Machine Default screen. (See How to
Display the Machine Default Screen on page 6-13.)
2 Press U or V to select the cassette for which you
set the paper type from Paper Type(1st) to
(4th), and then press the Enter key.
3 Press U or V to select the paper type, and then
press the Enter key.
End
Auto Cassette SW
Machine Default :
Paper Size(1st)
On
Auto M
:
:
Paper Size (1st cassette ):
Auto Detection Metric
Auto Detection Inch
*
Machine Default :
Paper Type(1st) Plain:
Paper Size(3rd) Auto M
:
Paper Size(4th) Auto I
:
Paper Type (1st cassette ):
Plain
Preprinted
*
Bond