Maintenance
OPERATION GUIDE 8-9
8
4 When the electrical charge section is pulled out
approximately 5 cm (2 inches), remove the grid
cleaner and then push back the electrical charge
section all the way into the main body.
IMPORTANT: After you use the grid cleaner to clean
the electrical charge section, the machine can be used
again after more than 5 minutes have elapsed.
Installing Toner Container and Waste Toner Box
1 Take the new toner container out of the toner kit.
2 Hold the new toner container vertically and tap the
upper part five times or more.
Turn the toner container upside down and tap the
upper part five times or more.
3 Shake the toner container up and down five times
or more.
Turn the toner container upside down and shake it
five times or more.
4 Hold the toner container horizontally and shake it
from side to side five times or more.
To Next Page
Loading...
