Kyocera TASKalfa 181 - Page 81

Copying Functions
OPERATION GUIDE 4-13
4
4 Press U or V to select Input Size, and then
press the Enter key.
5 Press Y or Z to set the vertical size.
You can set the vertical size to 2" to 11 5/8" in 1/8"
increments [50 to 297 mm in 1 mm increments].
6 Press V to move to the horizontal size.
7 Press Y or Z to set the horizontal size, and then
press the Enter key.
You can set the horizontal size to 2" to 17" in 1/8"
increments [50 to 432 mm in 1 mm increments].
8 Press the Start key to start copying.
Original Size :
Auto
Input Size
*
Input Size :
2"
2"
Input Size :
2"
2"