10. Close the film cutter to cut the film
11. Un load the bale to the ground
12. Lower the wrapping table back to the horizontal position
down
12. Turn the wrapping table in the loading position
down
13. Verify the present number of wraps in the normal screen of
the main menu
00.00
◄ ▼
hold
14. If needed change the digits (00.00) into the calculated value
(YY) of step 6 and additional rotations for a complete wrapped
bale.
• Hold the button until the digit has the correct value (0...9).
hold
• Release the button selects the digit number and select the
next digit.
release
15. Return to the main menu.
release
Operation adjustments 4-9
W-H003.1403EN
To Next Page
Loading...
