Safety 2-9
D-I012.1109EN
innovators in agriculture
2.5.7 Software Controlled Charging System
The operational software of the JUNO 150 controls the charge system.
This allows to keep the vehicle connected to the charging station when
it is not moving, even if the battery is fully charged. The software
prevents overcharging the battery and keeps it fully charged until the
next operation.
2.5.8 Fuse
The Multiboard PCB has a one-time-use fuse that breaks the circuit in
the event of a power malfunction or an electrical short-circuit.
2.5.9 Overload Protection
The drive motors are protected against overload. If the current is high
for a long time the overload protection operates and stops the JUNO
150 to prevent overheating. An alarm message is also generated.
2.5.10 Gel Battery
The battery is filled with gel and is completely sealed to protect it
against leakage.
To Next Page
Loading...
