EasyManua.ls Logo

LELY JUNO 150 - 3. Specifications of the JUNO 150; Feed Pusher Specifications

LELY JUNO 150
126 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Specifications 3-1
D-I012.1109EN
innovators in agriculture
3. SPECIFICATIONS
3.1 Feed Pusher
3.1.1 Dimensions and Weight
• Diameter: 156 cm (61.4 in)
• Height: 106 cm (41.7 in)
• Weight: 575 kg (1268 lbs)
• Rotating part height: 60 cm (23.6 in)
• Maximum width of feed: 200 cm (78.7 in)
• Maximum height of feed: 75 cm (29.5 in).
3.1.2 Battery
• Number of batteries: 1
• Weight: 19.9 kg (43.9 lbs)
• Nominal voltage: 12 V
• Capacity: 55 Ah
• Charging time: 6 hours maximum
• Spare capacity: 120 min
• Length: 254 mm (10.0 in)
• Width: 174 mm (6.9 in)
• Height, including battery terminals: 195 mm (7.7 in)
• Height, excluding battery terminals: 173 mm (6.8 in)
3.1.3 Operation
• Number of different programmable routes: max. 16
• Number of actions per route: max. 125
• Number of routes per time path: max. 48
• Maximum duration of a time path: 24 hour
• Travel speed: 12 m/min (display: 200)
• Maximum driving time without charging: 2 hours
• Route programming: with E-Link manual controller.
3.1.4 Miscellaneous
• Drive: 2× electric motor
• Number of wheels: 3
• Average power consumption: 0.05 kWh
• Determination of direction of motion: using gyroscope
• Determination of distance to feed fence: using ultrasonic sensor
• Determination of distance travelled: via encoders on motors
• Calibration points: Metal stripes along feed alley.

Table of Contents