Operating Instructions 6-13
D-I012.1109EN
innovators in agriculture
11. If you want:
• To add another route to the time path, push soft button [New]
and repeat steps 7 to 11
• Confirm an go up one level, push [ESC].
12. Push soft button [Yes] to save the new time path.
6.7.10 Make or Restore a Backup
Note:
Make a backup each time you changed a route or time path or installed a new
E-Link.
Backups are made on the E-Link.
1. Stop all timed actions (page 6-13).
2. In the main menu of the E-Link, select Routes and push [ ].
3. Select Backup route and push [ ].
4. Push soft button [Bckup].
5. Push soft button [Yes].
6. Wait until the process ends with a beep.
Note:
A backup can be restored by a Lely certified technician.
6.8 Start or Stop Timed Actions
1. Get the E-Link Manual Controller (page 6-2).
2. Push [ESC] or [
] to wake up the E-Link.
3. In the main menu of the E-Link, select Work and push [
].
Note:
If the pane on the upper side of the menu, that displays the actual time, is
grayed out, the timed actions are ON.
4. Push [START/STOP].
Figure 41. Start or stop timed actions
To Next Page
Loading...
