Operating Instructions 6-15
D-I012.1109EN
innovators in agriculture
6.10 Block a Route
1. Stop all timed actions (page 6-13).
2. In the main menu of the E-Link, select Routes and push [ ].
3. Select Blockage route and push [ ].
4. Push [ ] to select the route that you want to block and push [
].
5. Push [ ] to block the route (value 1) and push [ESC] to confirm
and go one level up.
Note:
Blocking a route has no effect on Manual Route (page 6-14).
6.11 Reset the Emergency Stop Button
1. Turn the button clockwise and pull it out until it locks (fig. 10, page
2-10).
To Next Page
Loading...
