7-4 Maintenance
D-I012.1109EN
innovators in agriculture
7.4 Maintenance Procedures
WARNING
Danger of being entangled by rotating parts.
Keep hands, loose clothing, and long hair away from moving parts
during operation of the JUNO 150.
7.4.1 Clean the Charging Strips and the Charging Electrodes
Preparation
1. Disconnect the main power supply to the charging station.
2. Manually drive the JUNO 150 to a clean and quiet location (page
6-4).
Clean
1. Thoroughly clean the charging strips (1, fig. 45, page 7-4) of the
JUNO 150 with sand paper.
2. Thoroughly clean both electrodes of the charging station (2) with
sand paper.
3. Grease the charging electrodes and charging strips.
Close-up
1. Connect the charging station to the main power supply.
2. Manually drive the JUNO 150 to the charging station (page 6-4).
3. Start the timed actions (page 6-13).
Figure 45. Clean the charging strips and electrodes
To Next Page
Loading...
