LELY JUNO 150 - Reset a Modified Route to the Previous Version; Delete a Route; Set or Delete a Manual Route

6-10 Operating Instructions
D-I012.1109EN
innovators in agriculture
2. Select the property you want to modify with soft button [<].
3. Modify the value of the property with [
] or [ ].
13. Push [ESC] to confirm and go one level up.
14. Push soft button [Yes] to confirm.
6.7.4 Reset a modified Route to the previous Version
1. Get the E-Link Manual Controller (page 6-2).
2. Push [ESC] or [
] to wake up the E-Link.
3. Stop all timed actions (page 6-13).
4. In the main menu of the E-Link, select Routes and push [ ].
5. Select Modify routeand push [ ].
6. Select Modify reset and push [ ].
7. Select the route you want to reset and push [ ].
8. Push soft button Yes to confirm.
6.7.5 Delete a Route
1. Get the E-Link Manual Controller (page 6-2).
2. Push [ESC] or [
] to wake up the E-Link.
3. Stop all timed actions (page 6-13).
4. In the main menu of the E-Link, select Routes and push [ ].
5. Select Delete route and push [ ].
6. Select the route you want to delete and push [ ].
7. Push soft button [Yes] to confirm.
6.7.6 Set or Delete a Manual Route
Note:
Set a manual route to manually drive (a set of) route(s) or to test a route (page
4-14).
1. Get the E-Link Manual Controller (page 6-2).
2. Push [ESC] or [
] to wake up the E-Link.
3. Stop all timed actions (page 6-13).
4. In the main menu of the E-Link, select Work and push [ ].
5. Push [ ] to select the menu Manual route.
Set a Series of Routes
1. In the menu Manual route, push [
] to select the series of routes
you want to set (A, B, C or D).
2. Push soft button [>] to select the first route in the series.